❗️Important
For the calibration to be correct, the lock case must be installed in the door before performing the calibration.
There are two ways to calibrate the PDL: either via the app or by holding down the red button on the lock’s faceplate while inserting the battery.
Option #1 – Calibration via the app
❗️You need administrative permissions or be an Installer at the place to calibrate via the app.
Tap the three dots next to the lock name.
Then tap Tools and Calibrate.
Option #2 – Calibrate by removing and reinserting the battery
Remove and reinsert the battery by following the instructions for battery replacement.
❗️You do not need to replace it with a new battery.