❗️Viktigt
Parakey PDL must be installed with door handles that have a double-acting return spring in addition to the supplied plate.
Parakey PDL must be installed with a cylinder on the outside of the door.
Parakey PDL must be installed with a thumbturn that has a return spring, or with double cylinders.
Ensure that a compatible strike plate is used. 👉 See recommended strike plates.
Correct latch orientation? Ensure that both latch and deadbolt are oriented correctly. Instructions for rotating them can be found at this link.
Mounting instructions
Ensure that the battery is not inserted.
Retract the hook bolt.
Insert the cylinder and thumbturn into the cylinder ring.
Insert screws and tighten. NOTE: arrows must face downwards.
Tighten any stop screws.
Mount the spindle and external return spring.
Mount and tighten the handle.
Unscrew the battery cover, insert the battery, but do not replace the cover yet. NOTE: the battery’s positive pole (+) must face outwards, i.e., towards the cover.
Press and hold the red button while screwing the battery cover back on. At this point, the motor in the lock case will make a short buzzing sound.
Complete the installation in the app by following these instructions.